IP POWER 9212 Delux
The IP Power 9212 Delux is a Network Controller & Sensor with 8 DI & 8 DO& RS232 . Set 8 DI as dry or wet contact , no need specific PC or software, control devices remotely and check the device status via the Internet anywhere in the world, using a Browser such as Internet Explore or Netscape, 9212 includes 8 Digital Inputs, 8 Digital Relay Outputs and works like an IO Server. You can integrate it with Home / Office security, Personal entertainment, and Industrial field applications.

. The IP POWER 9212 can be flexibly applied to Home entertainment & industry security & systems with integrated management. .

1.       Embedded web server, no need to connect wai PC, use Ethernet or Internet (LAN / Wan)

2.       Accesible via popular web browsers- IE (Internet Explore) or Netscape specific S/W NOT required..

3.     With 8DI & 8DO: Direct control relay output (DO) and detection of digital input (DI)

       8 Set Sensor ( 8 DI ) – Default 4 Set Source mode (Dry - Voltage Input) and & 4 Set Sink mode (Wet- Resistance Input).

       Source& Sink mode could be switched . Mail Alarm

       8 Set Controllers ( 8 DO ) – Default 4 Set NO - Normal Open & 4 Sets NC - Normal Close.

4.   Network protocols supported: HTTP, DDNS, SNMP, DHCP, Virtual and Dynamic IP.

5.   Support RS232 to control.

6.   Timer Schedule - pre-set the time to turn power on / off.

7.     Security code identification and Hardware reset function.

8.     Easy installation, setup and supports online upgrade.

9.     Individual LED indicate switch-working status.

10. Safe, durable, non-electric leakage and anti-farmable design.

11.  Polar protection – even if connected to contrary port

12.  Digital inputs provide de-bouncing function

13.  Update firmware by the TCP/IP network.

14.  SDK (Software Development Kits) adn WebPage Command Provided.

15.  Embedded " WATCH DOG" - by request

16. Support GPRS - setting by for onling Cell phome ( item limit).

17.  Support SMTP: Send IP address by E-mail as log in and send e-mail as detecting sensor trigger.

18.  Works with GPRS cell phone - Motorola V878. C550 and Sony Eriksson T630 . K700i .

IP Power 9212 include three device : 

1. Core box :IP 9200 2. IP POWER 9202 Pro 3. IP Sensor 9201 Pro 

1.Core box :IP 9200

* Power: 5~24 VDC /1A        * Reset to default Factory value

* LED Light show ON /OFF Status       * RJ45 10/100M Ethernet port

* Digital Out put: Need to connect IP POWER 9202

* Digital Input: Need to connect IP SENSOR 9201

2.IP POWER 9202 Pro 　

* Max Switching Voltage: 240 VAC, 60VDC         * Max Switching Current: 12A AC/DC      

* Operation time: Max 10ms       *Ambient temperature: -30'c ~+ 55'c

1,2,3,4 : NC - Normal close , 5,6,7,8 : NO- Normal open  

3.IP Sensor 9201 Pro

1,2,3,4: Source Mode - Voltage Input. ON: 4V ~ 24V, OFF: 0V~3V

5,6,7,8: Sink Mode- Resistance Input. ON: 200Ω ~ 0Ω  , OFF: 500Ω~ Infinity

Size:All three box are all  80x50x15 mm

Source Mode:  Voltage Input - Use Voltage sensor to detect of any change on device. For instance: Use in Detector like Smoke / Gas / Density Detector, Infrared Detector, or Valve like High-temperature / High-pressure / Gas / Automatic control valve

Sink Mode: Resistance Input - By Reed switch or any non-voltage sensor to detect if any change or movement. For instance: Door, Windows, Safe box, Drawer and security device.

...............................................................................................................
Industrial Application

Security & Industrial System: Access Control, Surveillance, Communication Information Security, Fire Prevention and Auto control system. For Counter, Shopping Mall, Casino, Supermarket, Parking lot. Traffic control, Airport, Subway and military Devices.
 

Residential Safety: Door & Windows, Safety Case, Drawer, Light and Home Appliance.

IP Application: Integrate with our IP Camera 9000/A or IP Video 9100/A and 9120 (With RS232) to fully support Network monitor and remote control.